光学系统光阑应用的实例

介绍了一种光学组合系统，通过构造光学系统虚拟的视场光阑实现人眼屈光度测量，它是光学系统光阑应用的生动实例.     

Measurement of wire diameter by optical diffraction

A combined interference and diffraction pattern, in the form of equidistant interference fringes, resulting from illuminating a vertical metallic wire by a laser beam is analyzed to measure the diameter of four standard wires. The diameters range from 170 to 450 μm. It is found that the error in the diameter measurements increases for small metallic wires and for small distances between the wire and the screen due to scattering effects. The intensity of the incident laser beam was controlled by a pair of sheet polaroids to minimize the scattered radiation. The used technique is highly sensitive, but requires controlled environmental conditions and absence of vibration effects. The expanded uncertainty for k=2 is calculated and found to decrease from U(D)=±1.45 μm for the wire of nominal diameter 170 μm to ±0.57 μm for the diameter 450 μm.     

工业污染排放中气──固两相流的光学测量

烟尘及各种工业性粉尘排放是典型的气-固两相系．迄今为止，国内外尚缺少有效的监测其排放的手段．本文基于光的散时原理，提出了一种非接触的光学方法，能对上述固体颗粒物的污染排放浓度及粒径大小进行实时、在线的监测。计算机模拟和实验研究表明，该方法具有广阔的工业应用前景。     

高速电视摄象系统的象质评价和动态计测精度

本文对高速摄象系统(包括电视摄象系统和光机式摄象系统)的象质评价方法予以讨论,并用实验方法对目前广泛使用的Kodak SP-2000、NAC HSV-200等高速电视摄象系统及我们自己开发的一维扫描电视摄象系统的象质,在新的定义下给出了评价,对它们的动态精度作了对比性测试,同时和光机式高速摄象系统作了比较。     

Assignments of methanol laser lines by frequency measurements and Fourier transform spectroscopy

We have measured the frequencies of four CH₃OH far-infrared laser lines that were previously known only by wavelength measurement. Two of these lines turned out to be doublets, bringing the total number of measured lines to six. We can now confirm the assignments of five of them and definitely disprove the assignments proposed for the sixth.In particular we confirm the assignments for the four strong laser lines at 205 and 208 µm pumped by the 9-P(34) CO₂ laser line. These lines share a common upper level in the first excited CO-stretch state, and terminate in the upper and lower levels of a hybrid state with J=5. Heterodyne frequency measurements and conventional microwave spectroscopy show that both lines are split into two components approximately 3.5 MHz apart. The origin of this further splitting is interpreted as a perturbed K-splitting.Work supported by Consiglio Nazionale delle Ricerche -Italia     

Experimental verification of drop/impact simulation for a cellular phone

Conducting drop tests to investigate impact behavior and identify failure mechanisms of small-size electronic products is generally expensive and time-consuming. Nevertheless, strict drop/impact performance criteria for hand-held electronic products such as cellular phones play a decisive role in the design because they must withstand unexpected shocks. The design of product durability on impact has heavily relied on the designer's intuition and experience. In this study, a reliable drop/impact simulation for a cellular phone is carried out using the explicit code LS-DYNA. Subsequently globallocal experimental verification is accomplished by means of high-speed photography and impact response measurement. Using this methodology, we predict potential damage locations in a cellular phone and compare them with real statistical data. It is envisaged that development of a reliable methodology of drop/impact simulation will provide us with a powerful and efficient vehicle for improvement of the design quality and reduction of the product development cycle.     

Guaranteed-accuracy approximation of reachable sets for a linear dynamic system subject to impulse actions

A method is proposed for approximating the reachable set of a dynamic system with a state space dimension no higher than six-eight considered on a finite time interval. The system is governed by linear differential equations with piecewise constant coefficients and impulse actions specified at prescribed times. The method is based on guaranteed-accuracy polyhedral approximations of reachable sets at researcher-specified times. Every approximation is constructed using the preceding one. A procedure is described for choosing parameters of the method that ensure the required accuracy with close-to-minimal time costs.     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。     

光刻机投影物镜的像差原位检测新技术

提出了一种新的光刻机投影物镜像差原位检测(AMF)技术。详细分析了该技术利用特殊测试标记检测投影物镜球差、像散、彗差的基本原理,论述了该技术利用对准位置坐标计算像差引起的成像位置偏移量的方法。实验结果表明AMF技术可实现球差、彗差、像散等像差参量的精确测量。AMF技术考虑了光刻胶等工艺因素对像差引起的成像位置偏移量的影响,有效避免了目前基于硅片曝光方式的彗差原位检测技术对离焦量、像面倾斜等像质参量限制的依赖。     

基于CT算法的束团横向相空间测量

精确测量束团的发射度和横向相空间, 在高亮度电子束的产生和应用中具有重要意义. 传统测量方法在测量发射度时需要对束团在相空间内分布进行初始假设, 且只能给出相椭圆的twiss参数;基于CT(computerized tomography)算法的束团横向相空间测量方法无需先验假设, 能给出粒子在相空间内的真实分布, 测量结果更为精确. 介绍了基于CT算法的束团横向相空间测量的原理和初步实验结果, 并与四极透镜扫描法测量的结果进行了比较.